Deck Cleaning & Power Washing Park City, IL

Deck cleaning for Park City homes

Deck cleaning in Park City starts with knowing the housing: a small city of 1960s-to-1980s ranches near Waukegan. We see a lot of small pergolas and screens, and the work is planned around it.

Much of Park City is in central Lake County, where mature trees are the main issue: shade keeps wood damp and grows mildew on the north side. Cleaning is not optional here, and we brighten after so the tone comes back.

The most common deck we see is one a homeowner or a general power-washing company went over at high pressure. The boards look clean for a week, then dry out fuzzy and gray. The pressure tore the surface fibers loose. A chemical clean does the work, and the pressure only rinses. If your deck is due for stain, the cleaning is step one and we roll it into the staining job.

How the job goes in Park City

1. Cover and pre-wetPlants, siding and light fixtures around the deck get wetted or covered. We check for loose boards and popped nails before we start.
2. Apply the cleanerA percarbonate wood cleaner sits for 10 to 15 minutes and breaks down mildew, algae and the gray layer. Stubborn spots get a scrub brush.
3. Low-pressure rinseUnder 1,000 PSI with a wide fan tip, working with the grain. The rinse is only removing what the cleaner already loosened.
4. BrightenAn oxalic-acid brightener neutralizes the cleaner and restores the natural wood tone, especially on cedar and redwood.

Other work we do in Park City

Homeowners here also ask us about Pergola & gazebo staining in Park City, Fence cleaning in Park City and Fence staining in Park City. See everything on the Park City service area page, or read the full deck cleaning guide. We also cover nearby Libertyville, Green Oaks and North Chicago.