Deck Cleaning & Power Washing Powers Lake, WI

Deck cleaning for Powers Lake homes

Most of our deck cleaning calls in Powers Lake come from homes with a small lake community of cottages and newer lake homes. That means decks under mature oaks that stay damp, which changes the prep more than the stain.

Powers Lake sits on Powers Lake, and waterfront wood weathers faster on the water-facing side than the house side. We check both and often give the exposed side a second coat.

The most common deck we see is one a homeowner or a general power-washing company went over at high pressure. The boards look clean for a week, then dry out fuzzy and gray. The pressure tore the surface fibers loose. A chemical clean does the work, and the pressure only rinses. If your deck is due for stain, the cleaning is step one and we roll it into the staining job.

How the job goes in Powers Lake

1. Cover and pre-wetPlants, siding and light fixtures around the deck get wetted or covered. We check for loose boards and popped nails before we start.
2. Apply the cleanerA percarbonate wood cleaner sits for 10 to 15 minutes and breaks down mildew, algae and the gray layer. Stubborn spots get a scrub brush.
3. Low-pressure rinseUnder 1,000 PSI with a wide fan tip, working with the grain. The rinse is only removing what the cleaner already loosened.
4. BrightenAn oxalic-acid brightener neutralizes the cleaner and restores the natural wood tone, especially on cedar and redwood.

Other work we do in Powers Lake

Homeowners here also ask us about Pergola & gazebo staining in Powers Lake, Fence staining in Powers Lake and Deck staining in Powers Lake. See everything on the Powers Lake service area page, or read the full deck cleaning guide. We also cover nearby Pell Lake, Silver Lake and Salem Lakes.