Deck Sealing & Waterproofing Lincolnshire, IL

Deck sealing for Lincolnshire homes

Deck sealing in Lincolnshire starts with knowing the housing: wooded 1970s-to-1990s neighborhoods with mature trees. We see a lot of shaded decks along the river corridor, and the work is planned around it.

The wooded corridor along the Des Plaines River means a lot of Lincolnshire yards are shaded for most of the day. Shaded wood stays damp, grows mildew on the north side and needs a thorough chemical clean and brightener before it will take stain evenly.

Ask a Lake County homeowner when their deck was last sealed and the honest answer is usually never. Water gets into the end grain at the board ends, the screw holes and the ledger board against the house, and that is where rot starts. A sealer is cheap insurance. It is also the one step people think they can skip on a hardwood deck, when hardwood is exactly what a UV-blocking penetrating oil is made for.

How the job goes in Lincolnshire

1. Moisture checkThe deck must read under about 15% on a moisture meter. Sealing wet wood traps the water in and the sealer will not bond.
2. Clean and brightenEven a deck that looks clean has surface oxidation. A percarbonate wash and brightener open the grain so the sealer penetrates.
3. Mask and protectSiding, doors, planters and the patio below are covered. Sealers are thin and travel.
4. Apply thin, even coatsPad or sprayer with a back-brush. The wood takes what it can absorb and the rest is wiped off so it does not leave a sticky film.

Other work we do in Lincolnshire

Homeowners here also ask us about Fence cleaning in Lincolnshire, Pergola & gazebo staining in Lincolnshire and Deck staining in Lincolnshire. See everything on the Lincolnshire service area page, or read the full deck sealing guide. We also cover nearby Bannockburn, Indian Creek and Riverwoods.