Deck Sealing & Waterproofing Powers Lake, WI

Deck sealing for Powers Lake homes

Most of our deck sealing calls in Powers Lake come from homes with a small lake community of cottages and newer lake homes. In practice that means decks under mature oaks that stay damp.

Powers Lake sits on Powers Lake, and waterfront wood weathers faster on the water-facing side than the house side. We check both and often give the exposed side a second coat.

Ask a Lake County homeowner when their deck was last sealed and the honest answer is usually never. Water gets into the end grain at the board ends, the screw holes and the ledger board against the house, and that is where rot starts. A sealer is cheap insurance. It is also the one step people think they can skip on a hardwood deck, when hardwood is exactly what a UV-blocking penetrating oil is made for.

How the job goes in Powers Lake

1. Moisture checkThe deck must read under about 15% on a moisture meter. Sealing wet wood traps the water in and the sealer will not bond.
2. Clean and brightenEven a deck that looks clean has surface oxidation. A percarbonate wash and brightener open the grain so the sealer penetrates.
3. Mask and protectSiding, doors, planters and the patio below are covered. Sealers are thin and travel.
4. Apply thin, even coatsPad or sprayer with a back-brush. The wood takes what it can absorb and the rest is wiped off so it does not leave a sticky film.

Other work we do in Powers Lake

Homeowners here also ask us about Fence staining in Powers Lake, Fence cleaning in Powers Lake and Deck staining in Powers Lake. See everything on the Powers Lake service area page, or read the full deck sealing guide. We also cover nearby Pell Lake, Silver Lake and Salem Lakes.