Deck Staining Barrington, IL

Deck staining for Barrington homes

Most of our deck staining calls in Barrington come from homes with a historic village center with larger lots and older homes. That means long perimeter fences on the bigger lots, which changes the prep more than the stain.

Barrington sits along the Fox River nearby, and the tree cover that comes with it keeps decks and fences damp longer in the morning. We schedule washes early in the week so the wood has time to dry before stain goes on.

We stain cedar, pressure-treated pine, and hardwood decks across Lake County. Every job starts with a proper wash and a moisture check, because stain applied to dirty or damp wood peels within a year. Then we apply a penetrating oil or oil-hybrid stain in the tone you pick, back-brushed so it soaks in instead of sitting on top.

How the job goes in Barrington

1. Walk the deck with youWe look at the boards, rails, stairs and any soft spots, and confirm the stain type and tone before anything gets wet.
2. Clean and brightenA sodium percarbonate deck cleaner lifts gray oxidized wood, mildew and old failed finish. A brightener follows to neutralize and open the grain.
3. Dry and sandTwo to three dry days depending on weather. Raised grain and rough spots get a light sand so the stain goes on even.
4. Stain and back-brushApplied by pad or sprayer and immediately back-brushed into the wood. Rails, spindles and stair risers are brushed by hand.

Other work we do in Barrington

Homeowners here also ask us about Pergola & gazebo staining in Barrington, Deck restoration in Barrington and Deck repair in Barrington. See everything on the Barrington service area page, or read the full deck staining guide. We also cover nearby Kildeer, Wauconda and Tower Lakes.