Deck Staining Kenosha, WI

Deck staining for Kenosha homes

Deck staining in Kenosha starts with knowing the housing: a mix of historic homes near the lakefront, post-war bungalows and newer west-side subdivisions. In practice that means cedar privacy fences across the west-side subdivisions.

Kenosha sits on Lake Michigan, and waterfront wood weathers faster on the water-facing side than the house side. We check both and often give the exposed side a second coat.

Most deck staining problems come from prep, not product. A deck that was power-washed and stained the same afternoon will look fine for a month and fail by the following spring because the wood was still wet inside. We wash, let the deck dry to under 15% moisture, sand any raised grain, then stain. It takes an extra visit. It is the difference between a finish that lasts three or four years and one that lasts one.

How the job goes in Kenosha

1. Walk the deck with youWe look at the boards, rails, stairs and any soft spots, and confirm the stain type and tone before anything gets wet.
2. Clean and brightenA sodium percarbonate deck cleaner lifts gray oxidized wood, mildew and old failed finish. A brightener follows to neutralize and open the grain.
3. Dry and sandTwo to three dry days depending on weather. Raised grain and rough spots get a light sand so the stain goes on even.
4. Stain and back-brushApplied by pad or sprayer and immediately back-brushed into the wood. Rails, spindles and stair risers are brushed by hand.

Other work we do in Kenosha

Homeowners here also ask us about Fence staining in Kenosha, Deck cleaning in Kenosha and Fence cleaning in Kenosha. See everything on the Kenosha service area page, or read the full deck staining guide. We also cover nearby Racine, Pleasant Prairie and Beach Park.